Does a dash cam record when the car is off?
Only if the camera supports parked recording and still has a compatible power source. A parking-mode setting alone is not enough.
Check what happens to the power socket
Some vehicle accessory sockets switch off with the ignition; others remain live. A camera connected to a switched socket loses power when the socket does. A live socket can keep drawing from the vehicle battery, so it is not automatically a suitable unattended setup.
Start with the camera’s supported power accessories and the vehicle’s socket behavior. Do not buy a generic USB adapter assuming it provides parking-mode switching or battery protection.
Choose between hardwiring and a camera battery pack
A compatible hardwire kit can provide continuous power and, where specified, low-voltage cutoff. It must match the camera’s connector and parking-mode requirements. Installation requires identifying appropriate circuits and routing wiring clear of airbags.
A dedicated compatible dash-cam battery pack separates parked recording from direct continuous draw on the starter battery while parked. It still needs charging and has finite runtime. A household USB power bank is not automatically suitable for vehicle temperatures or a particular camera’s parking-mode switching.
Recording and remote viewing are separate
A camera can save footage to its memory card without letting you watch it remotely. Remote viewing adds a data-connection requirement and may add a subscription. Garmin Mini 3 live view, for example, requires paid Vault service and active Wi-Fi.
If your aim is evidence after you return to the car, prioritize reliable power, storage and event capture. If you need live viewing, confirm connectivity where the car is actually parked before committing to that setup.
Verify the result before relying on it
After installation, check that the camera changes into its intended parked mode, saves a sample file and resumes normal recording when you start the car. Check the installer’s power-protection configuration and review saved clips periodically.
Do not interpret an illuminated LED as proof that the right view is recording. If footage is missing, resolve power, card and configuration problems before treating the camera as unattended protection.
