ESR 15W magnetic car charger: features, fit and setup

The ESR combines a magnetic phone mount with up to 15W wireless charging. Choose it when your phone and case support the magnetic charging connection and you want to place and remove the phone without a mechanical cradle.

By GearMyRide Editorial Team · November 17, 2026
Research-based advice · How we pick

ESR 15W magnetic car charger

It needs a suitable USB-C power supply and a compatible phone/case. A strong magnetic attachment alone does not prove charging compatibility.

SpecificationDetail
Maximum charging output15W, with compatible phone and power setup
Required supplyUSB-C, at least 20W
Mounting optionsVent or dashboard
OrientationPortrait or landscape

We may earn a commission from qualifying Amazon purchases.

See ESR 15W magnetic car charger at Amazon

Dashboard vs. vent phone mounts: which should you use?

Check three parts of the charging setup

The mount, phone and case must work together. Compatible iPhone models and suitable magnetic cases are the most straightforward use; supported Android configurations require particular models and cases. Do not assume a magnetic ring makes any phone charge wirelessly.

If you switch phones frequently, a mechanical cradle with a separate charging cable can be less restrictive. Choose this ESR for its combined mounting-and-charging function, not simply because the magnet attaches to your case.

Give the charger enough input power

Use the supplied charging cable with a suitable USB-C supply of at least 20W. A low-output vehicle USB socket can limit the charging setup even though the mount is rated for up to 15W.

The phone may charge below the maximum depending on support, temperature and other conditions. Avoid interpreting the maximum output as a promise that every phone gains charge at the same rate while navigating.

Choose the mounting option before fixing it in place

The vent and dashboard options require different checks. A vent attachment needs suitable geometry and must not strain the louvers. Dashboard adhesive needs a compatible prepared surface.

Confirm the full phone does not hide the road, displays or controls in either orientation. Set up the position while parked and verify the charging indication before your first journey.

Compare the alternative

iOttie Easy One Touch suction mount: Choose the Easy One Touch suction mount when you want a cradle rather than a magnetic attachment. The trigger closes the side arms around the phone, and the adjustable foot helps position it.